C‑DRONE
Drone flying close to a building facade for inspection

🏢 FACADE INSPECTION · AIX-EN-PROVENCE (13) · €300–1,200 PER JOB

Drone facade inspection in Aix-en-Provence

Drone facade inspection documents a building's condition over its full height without a lift platform, rope-access technicians or road closures. Cracks, concrete spalling, loose elements, rebar corrosion, render detachment, tired expansion joints, water ingress: the high-resolution sensor, combined with zoom, records millimetre-scale defects tens of metres up. It is the ideal tool for pre-renovation surveys and the statutory monitoring of high-rise buildings.

The standard deliverable is a report organised by elevation (north, south, east, west) with defects mapped onto rectified photos, supplemented if needed by a georeferenced facade orthophoto usable by your engineering office. Property managers, architects, inspection bodies and local authorities use our surveys to prioritise works and secure perimeters where falling material is a risk.

Free quote — facade inspection in Aix-en-Provence

Rates

€300–1,200 per job — the range observed on the 2026 French market, including regulatory preparation, flight and delivery. The exact quote depends on the site, the deliverable and the airspace context in Aix-en-Provence.

Common use cases

The local context in Aix-en-Provence

Aix-en-Provence flies under several influences: the busy Aix-Les Milles airfield to the south-west, home to light aviation and helicopter units, the nearby Marseille-Provence CTR, and low-altitude military routes further afield. The pedestrian old centre, from Cours Mirabeau to the Mazarin quarter, falls under the built-up-area scenario with prefecture notification.

The Aix market is upmarket: bastides and Coteaux d'Aix wine estates to showcase, prestige real estate, the Arbois technology park and Les Milles business zone (30,000 jobs), film shoots drawn by Cézanne's beloved Sainte-Victoire, and an international opera festival generating summer event work.

Applicable regulations

Facades to inspect are almost always in built-up areas: the usual regulatory framework is the specific category (STS-01 scenario, populated-area flight with a class C5 drone) with prior prefectural declaration, the open category over public space (open to professionals since 1 January 2026, no overflight of people, daytime only), or sub-category A1 with a sub-250 g C0 drone for small buildings. The flight is conducted a few metres from the wall, well under the 120 m limit; a ground safety perimeter is marked out when the drone operates above public space, and neighbouring owners' consent is sought when the flight requires crossing their plot. Operator registered on AlphaTango, professional aerial liability insurance and Géoportail drone-map checks are systematic.

Frequently asked questions

Does the drone fully replace an engineering survey?

No: the drone provides the exhaustive, documented visual record; structural interpretation of defects remains the engineer's or architect's job. Our reports are designed to feed directly into their analysis.

Can you inspect a facade on a busy street?

Yes, with a specific-category flight declared to the préfecture and a ground safety perimeter managed by an assistant. We often work early in the morning to minimise disturbance to pedestrians.

How accurate is the photographic survey?

At 5 m from the facade, resolution reaches roughly 1 mm per pixel: microcracks, joint defects and early corrosion are clearly identifiable and measurable on the images.

Can this service be flown anywhere in Aix-en-Provence?

Almost: Aérodrome d'Aix-Les Milles (aviation légère et hélicoptères); CTR de Marseille-Provence au sud-ouest; Centre ancien piéton (scénario agglomération). Depending on the exact location, the pilot picks the right framework (open or specific category) and files the required declarations — included in the quote.

Other drone services in Aix-en-Provence

Facade inspection near Aix-en-Provence

Facade inspection: every city →

Going further