C‑DRONE
Top-down orthophoto-style view of farmland parcels captured by drone

🗺️ SURVEYING & PHOTOGRAMMETRY · REIMS (51) · €800–3,000 PER DAY

Drone surveying & photogrammetry in Reims

Drone photogrammetry turns a few hundred aerial photos into precision survey products: georeferenced orthophotography at 1–3 cm/pixel, digital surface and terrain models, 3D point clouds, contour lines, stockpile and earthworks volume calculations. With an RTK/PPK drone and ground control points measured by centimetre-grade GNSS, accuracy reaches 2 to 5 cm both horizontally and vertically — sufficient for most development studies, at a fraction of the cost of an exhaustive ground survey.

We cover from 1 to several hundred hectares per day depending on the required resolution, including hard-to-access sites: working quarries, landfills, riverbanks, industrial wasteland. Deliverables come in your coordinate system (Lambert 93 / RGF93, conic conformal projections) and standard formats (GeoTIFF, LAS/LAZ, DXF, GIS formats). Chartered surveyors, civil engineering offices, quarry operators and local authorities are regular clients.

Free quote — surveying & photogrammetry in Reims

Rates

€800–3,000 per day — the range observed on the 2026 French market, including regulatory preparation, flight and delivery. The exact quote depends on the site, the deliverable and the airspace context in Reims.

Common use cases

The local context in Reims

Reims airspace is relatively forgiving: the former air base 112 is closed and the Reims-Prunay airfield to the east generates only light traffic. The city remains a dense built-up area subject to the declaration scenario, and the hospital helipad plus major roads (A4, A26) call for the usual precautions.

The local market has two engines: heritage — the UNESCO-listed cathedral, whose restoration campaigns rely on drone inspection, and the Saint-Remi basilica — and above all champagne: the great houses (Veuve Clicquot, Taittinger, Pommery) and the UNESCO-listed hillsides commission brand imagery, plot mapping and harvest monitoring on the nearby Montagne de Reims.

Applicable regulations

Survey flights mostly take place outside built-up areas, in open category A2 or A3 (photogrammetry drones weigh 900 g to 6 kg) flying automated grid patterns below the regulatory 120 m. Long corridors or populated sites fall under the specific category (STS-01/STS-02, or an operational authorisation for BVLOS on long corridors). The operator is registered on AlphaTango and checks regulated zones on Géoportail: quarries and industrial estates are often near airfields or under military low-altitude training routes (RTBA), requiring protocols or time slots. Legally binding georeferencing (enforceable boundary plans) remains the exclusive remit of chartered surveyors, with whom we work as subcontractors.

Frequently asked questions

What accuracy can a drone survey guarantee?

With an RTK drone and ground control points, we guarantee 2 to 5 cm XYZ accuracy, verified against independent checkpoints whose residuals are documented in the processing report.

Does a drone survey replace a chartered surveyor?

No for legally binding documents (boundary demarcation, land division): that is the chartered surveyor's legal monopoly. Yes for technical studies: our deliverables feed directly into civil works design, volume calculations and environmental studies.

Does vegetation interfere with photogrammetric surveys?

Yes: photogrammetry measures the visible surface, so the canopy rather than the ground beneath. For wooded areas, we offer drone LiDAR, which penetrates vegetation and reconstructs the bare terrain.

Can this service be flown anywhere in Reims?

Almost: Aérodrome de Reims-Prunay à l'est; Hélistation du CHU de Reims. Depending on the exact location, the pilot picks the right framework (open or specific category) and files the required declarations — included in the quote.

Other drone services in Reims

Surveying & photogrammetry near Reims

Surveying & photogrammetry: every city →

Going further