
🏢 FACADE INSPECTION · CLERMONT-FERRAND (63) · €300–1,200 PER JOB
Drone facade inspection in Clermont-Ferrand
Drone facade inspection documents a building's condition over its full height without a lift platform, rope-access technicians or road closures. Cracks, concrete spalling, loose elements, rebar corrosion, render detachment, tired expansion joints, water ingress: the high-resolution sensor, combined with zoom, records millimetre-scale defects tens of metres up. It is the ideal tool for pre-renovation surveys and the statutory monitoring of high-rise buildings.
The standard deliverable is a report organised by elevation (north, south, east, west) with defects mapped onto rectified photos, supplemented if needed by a georeferenced facade orthophoto usable by your engineering office. Property managers, architects, inspection bodies and local authorities use our surveys to prioritise works and secure perimeters where falling material is a risk.
Free quote — facade inspection in Clermont-Ferrand
Rates
€300–1,200 per job — the range observed on the 2026 French market, including regulatory preparation, flight and delivery. The exact quote depends on the site, the deliverable and the airspace context in Clermont-Ferrand.
Common use cases
- Survey before facade renovation of an apartment or co-owned building
- Mandatory periodic monitoring of high-rise buildings
- Tracing the source of water ingress on a gable wall or spandrel
- Crack survey after drought or neighbouring construction works
- Facade survey of a historic monument without scaffolding
- Facade orthophoto for an engineering office or architect
The local context in Clermont-Ferrand
Clermont's sky is shaped by Clermont-Ferrand-Auvergne airport at Aulnat, immediately east of the city, whose CTR covers much of the conurbation: a protocol is essential. The Michelin industrial sites (Cataroux, Ladoux) are sensitive facilities not to be overflown without agreement, and the UNESCO-listed Chaîne des Puys includes bird-protection zones, notably around the Puy de Dôme.
The Auvergne capital combines an industrial market — Michelin and its supply chain, factory and logistics roof inspections — with a spectacular setting: a Gothic cathedral in black Volvic stone, Place de Jaude, and volcano panoramas. Puy de Dôme and Vulcania tourism plus ASM Clermont rugby at the Marcel-Michelin stadium round out demand.
Applicable regulations
Facades to inspect are almost always in built-up areas: the usual regulatory framework is the specific category (STS-01 scenario, populated-area flight with a class C5 drone) with prior prefectural declaration, the open category over public space (open to professionals since 1 January 2026, no overflight of people, daytime only), or sub-category A1 with a sub-250 g C0 drone for small buildings. The flight is conducted a few metres from the wall, well under the 120 m limit; a ground safety perimeter is marked out when the drone operates above public space, and neighbouring owners' consent is sought when the flight requires crossing their plot. Operator registered on AlphaTango, professional aerial liability insurance and Géoportail drone-map checks are systematic.
Frequently asked questions
Does the drone fully replace an engineering survey?
No: the drone provides the exhaustive, documented visual record; structural interpretation of defects remains the engineer's or architect's job. Our reports are designed to feed directly into their analysis.
Can you inspect a facade on a busy street?
Yes, with a specific-category flight declared to the préfecture and a ground safety perimeter managed by an assistant. We often work early in the morning to minimise disturbance to pedestrians.
How accurate is the photographic survey?
At 5 m from the facade, resolution reaches roughly 1 mm per pixel: microcracks, joint defects and early corrosion are clearly identifiable and measurable on the images.
Can this service be flown anywhere in Clermont-Ferrand?
Almost: CTR de l'aéroport Clermont-Ferrand-Auvergne (Aulnat); Sites industriels Michelin (Cataroux, Ladoux); Zones de protection de l'avifaune sur la chaîne des Puys. Depending on the exact location, the pilot picks the right framework (open or specific category) and files the required declarations — included in the quote.
Other drone services in Clermont-Ferrand
- Aerial photography in Clermont-Ferrand from €300
- Aerial video in Clermont-Ferrand from €500
- Real estate drone services in Clermont-Ferrand from €250
- Weddings & events in Clermont-Ferrand from €400
- Roof inspection in Clermont-Ferrand from €200
- Aerial thermal imaging in Clermont-Ferrand from €500
- Construction site monitoring in Clermont-Ferrand from €250
- Surveying & photogrammetry in Clermont-Ferrand from €800
- Precision agriculture in Clermont-Ferrand from €8
- Security & surveillance in Clermont-Ferrand from €600
- Immersive FPV video in Clermont-Ferrand from €700
- High-access cleaning in Clermont-Ferrand from €500
- Drone pilot training in Clermont-Ferrand from €350
- All services in Clermont-Ferrand
Facade inspection near Clermont-Ferrand
- Facade inspection in Lyon Auvergne-Rhône-Alpes
- Facade inspection in Saint-Étienne Auvergne-Rhône-Alpes
- Facade inspection in Grenoble Auvergne-Rhône-Alpes
- Facade inspection in Villeurbanne Auvergne-Rhône-Alpes
- Facade inspection in Annecy Auvergne-Rhône-Alpes
- Facade inspection in Valence Auvergne-Rhône-Alpes
Facade inspection: every city →