🫧 HIGH-ACCESS CLEANING · €500–2,500 PER JOB · 120 CITIES
Drone high-access cleaning: 2026 rates, anywhere in France
Cleaning drones project water and treatment solutions at high pressure onto high surfaces, without scaffolding, lift platforms or rope access: roof moss removal, facade cleaning, industrial cladding, soiled photovoltaic panels, glass canopies and steel structures. Fed from the ground through a hose connected to a pumping station, the drone treats 300 to 500 m² per hour depending on the surface — two to four times faster than traditional access methods, at a markedly lower cost as soon as the height exceeds two storeys.
We match the treatment to the substrate: low-pressure rinsing with deionised water for solar panels (no streaks), certified moss killer for roofs, appropriate detergents for cladding and render. The gain is not merely cosmetic: clean panels recover several percent of output, a de-mossed roof lasts longer, maintained cladding keeps its manufacturer warranty.
Free quote — high-access cleaning
Rates
€500–2,500 per job — the 2026 French market range. The quote depends on the site, the expected deliverable and the local airspace context.
Common use cases
- Roof moss removal and treatment without scaffolding
- Cleaning rooftop or ground-mounted photovoltaic panels
- Washing facades, cladding and signage on industrial buildings
- Cleaning glass canopies, domes and hard-to-reach structures
- Maintenance of silos, water towers and tall structures
- Applying water repellent to roofs after moss removal
Applicable regulations
Cleaning drones are heavy machines (10 to 25 kg with the loaded hose): they fall outside the open category for most jobs and operate in the specific category, under a scenario or an operational authorisation with SORA risk assessment, especially as they often fly in built-up areas right next to buildings. The ground area is always cordoned off and closed to the public during treatment (risk of falling water and spray). Environmental rules also apply: approved treatment products, controlled recovery or infiltration of runoff depending on the site, no direct discharge of biocides into storm drains. AlphaTango registration, pilot trained in tethered flight with payload, coordination with the building operator.
Frequently asked questions
Does drone cleaning damage tiles or panels?
No: pressure is adjusted to the substrate (low pressure on tiles and panels, never destructive high pressure) and the drone never touches the surface — unlike foot traffic, which cracks tiles.
What output gain can be expected after solar panel cleaning?
Depending on soiling (dust, pollen, bird droppings, agricultural or industrial deposits), observed gains range from 3 to 15% of output. A thermal inspection can be combined with cleaning to detect faulty modules.
Do water or power need to be cut during the work?
We bring our own water supply (tank and pumping station). For photovoltaic panels, shutting down the inverters during washing is recommended; we coordinate this with your plant operator.